Off topic discussion • Re: What GPS tracker?
A few other options to consider CalAmp LMU-3100M device. It has flexible HTTP/MQTT/TCP reporting and a good SDK. Might be overkill for 20 units though.Embedded Planet Tracker or Trackimo GPS tracker...
View ArticleGaming • Re: How to Get Minecraft Latest version on pi 5/4
I'm getting 30fps using the following hardware/settings....It's not the best experience but it's playable.Edit: it's important to close the launcher once the games running, thats about 10 framesYour...
View ArticleRaspberry Pi OS • Re: Rpi zero W not booting
I tried with Samsung PRO 32 GB micro SD card and different USB power supply from my power bank (5V, 3A) , still i am not able to install the OS.I don't know what i am doing wrong .?i tried same thing...
View ArticleRaspberry Pi OS • Re: Is there any ongoing work to reduce the Pi5 idle power...
You've made this change already https://www.raspberrypi.com/documentati ... turned-offStatistics: Posted by aBUGSworstnightmare — Thu Jul 04, 2024 4:09 am
View ArticleTroubleshooting • Re: Cron job does not execute command.
Success! Your explanation was wonderful! Now the troubleshooting can begin.The first and last lines (stopping and starting the MM software) work as intended. Lines 2-4 all print the same error and...
View ArticleBeginners • Re: USB Controller on Pi 3 Model B V1.2
lsusb -v returns: Bus 001 Device 004: ID 2dc8:3016 8BitDo IDLECouldn't open device, some information will be missingDevice Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0...
View ArticleGeneral • Re: Turn on/off a series of 12V LEDs
What is the current of the LED ?If current is < 500mA, then a ULN2803 could be an option. Buy a chip and solder to a proto board. Or look for breakout boards.And check total power dissipation, of...
View ArticleBeginners • Re: Newbie Problem Installing Packages
Thanks All - this helps a lotB.Goode - walking through it is great for the newbie -thanksI still have a ways to go. I understand now that it's important to protect the OS.For light users is it...
View ArticleTroubleshooting • Re: Windows (e.g. Chromium) not displaying properly their...
I had the same issue and the following post helped... viewtopic.php?t=358637P.S. I hope it works for VNC as well!Statistics: Posted by hauels — Thu Jul 04, 2024 5:15 am
View ArticleTroubleshooting • Re: Kiosk Mode on Bullseye / RPi 4B
running Code: which wayfire results in a nil response. so perhaps wayfire/wayland is not the default compositor in Bullseye? I first installed bookworm but found the IO very buggy and unreliable. all...
View ArticleGeneral • Re: Strange PIO behavior
Thanks for the help!! This got me going in the right direction. Here is the end result. I just pass in 0x00nnFF to handle changing the directions of the pins. Thanks for the suggestion!Code: .program...
View ArticleTroubleshooting • Re: HamClock autostart not starting
Hello Thagrol,Thanks for the response! I am running a Raspberry Pi 4 with 4GB of RAM. I started googling your suggestion about Wayland and that was the fix. I haven't seen this noted in any of the...
View ArticleAdvanced users • I need help with the ip route on my server - RPi4
I want to set my eth0 as the default IP route but when I do so it reverts back to wlan0I have the metric for eth0 set to 100 and wlan0 set to 500 in the /etc/dhcpcd.conf so it could make eth0 more...
View ArticleTroubleshooting • Re: Configuring Fixed Frequency and Bandwidth on Raspberry...
Come on Guys, Need for help!Statistics: Posted by qqdyta — Fri Jul 05, 2024 1:26 am
View ArticleHATs and other add-ons • Re: RPI 5 case with external UART port?
Indeed, what do you actually want?You may have to make your own, with a laser cutter:https://www.thingiverse.com/thing:80817Or a 3D printer:https://www.thingiverse.com/thing:1021496Statistics: Posted...
View ArticleTroubleshooting • Freezing under load with Raspberry Pi 4B 1gb, me or the pi?
Problem hardware: A Raspberry Pi 4b 1gb Operating systems tried: A Raspberry Pi OS 64-bit (bookworm) Raspberry Pi OS 32-bit (bookworm) Raspberry Pi OS 32-bit legacy (bullseye)I recently got a...
View ArticleGeneral discussion • Flash the eMMC
I have a Compute Module 4 IO Board.I want to write a Raspberry Pi OS image to Compute Module, using Raspberry Pi Imager, it took 30 minutes to complete the burning, because it took too long, so I use...
View ArticleGeneral discussion • Re: Flash the eMMC
are you planning on doing it a bunch of timeswhat does it matter if it's slow, you just need it the 1 time for a working system.Statistics: Posted by kerry_s — Fri Jul 05, 2024 2:41 am
View ArticleTroubleshooting • Re: Freezing under load with Raspberry Pi 4B 1gb, me or the...
1gb is not really enough for a desktop, a cli(lite) install will probably run like a champ.how fast does it freezeif you can hit ctrl + alt + f2 to get to the console before it freezes, you could try...
View ArticleClik here to view.
Troubleshooting • Re: Raspberry Pi parts
Presumably you mean the part labelled "Optional C-CS adapter" in this drawing?Can you repair it with a carefully applied drop of epoxy adhesive or similar?Or is this suitable? I don't know how generic...
View Article