Beginners • Re: TV LCD NO CONNECTION
But those files are saying i can'tt edit or i shouldn't?That's because you can leave a system broken or unbootable by editing /boot/config.txt. If you don't know what you're doing leave well alone. If...
View ArticleTroubleshooting • Re: Zero 2W setup, unpacking chromium stuck progress
Also, it is necessary to reboot the system after the swap file configuration changes are made.You don't need to reboot. You can use sudo systemctl restart dphys-swapfile.serviceStatistics: Posted by...
View ArticleBeginners • Re: Bootloader doesn't appear to be working.
Use a fresh image, you might have stopped it during the initial boot process which can take a long time on a SD cardExactly how long can it take? I waited 10 minutes on a fresh image and it just...
View ArticleC/C++ • Re: RP1 PWM Peripheral Single-Shot
There is no single-shot mode. An enabled channel stays enabled forever. I believe if the FIFO underruns, then the last entry is repeated the next time it is popped - so you could write a tuple of...
View ArticleClik here to view.
Troubleshooting • how to get rid of false trigger using edge detection
Hello, I am disparate in need for some help. Information about setup:I'm using a raspberry pi 4 on which is installed mycodo (a software for environmental control using sensors/relays, etc.). Using...
View ArticleRISCOS • Re: RISC OS 5.30 now available - with WiFi support
Okay, so I got it working (on the 4B and Zero W, at least*) , but I'm not 100% sure how or why.Poking through the router settings (quite an old router) for 2.4 GHz, these seem to be the winning...
View ArticleAdvanced users • Re: How to use OTP as a key provider for LUKS automount?
Hello!I am trying to set up an encrypted partition on my Raspberry Pi Zero 2w, and I've noticed that OTP introduction (https://pip.raspberrypi.com/categories/ ... 1-WP-1.pdf) mentiones that one can...
View ArticleTroubleshooting • Re: how to get rid of false trigger using edge detection
[img]https://imgur.com/a/KNxmlQM[/img][img]https://imgur.com/a/69kZkVR[/img]Your images don't work on this forum. It needs the URL to end with *.jpeg, *.png, *.gif or *.jpeg to work.So...
View ArticleGraphics, sound and multimedia • Re: Custom Build Progressive to Interlaced...
Thank you!Statistics: Posted by Videodrome — Thu May 23, 2024 8:02 pm
View ArticleOfficial Display • Powering Official Display and Pi with separate PSUs
I've dug my official display out of its box for a spaceship project for my son but have been getting non-stop low power warnings.I suspect I know the answer already but...Can I power the display with...
View ArticleClik here to view.
Camera board • Re: More FPS for HQ camera on RPI 5
I've made some experiment.I've took registers values from Jetson Nano driver for 4k 30fps mode, and put it to RPI driver.I achieved 30 FPS but the image is some noisy. I wonder if it can be because of...
View ArticleCamera board • Re: Trying to get Arducam 64mp Hawkeye to work on Pi4/5...
ignore the ./install_pivariety_pkgs.sh -p libcamera_apps from the arducam install instructionsDid you run the install script for libcamera_dev ?Statistics: Posted by trejan — Fri May 24, 2024 7:13 pm
View ArticleNetworking and servers • Re: fail2ban
fail2ban should be removed from the repository.It is a train wreck.At some point you will even get locked out without any way to get back in other than the debug port serial cable.Statistics: Posted...
View ArticleTroubleshooting • Re: Bookworm Pi400 keyboard issue
Now that I'm thinking on this, I always set the locale in imager, along with account name and I add an ssh key... etc. The locale was GB so it obviously failed to set from imager. That's why I never...
View ArticleHATs and other add-ons • Re: New M.2 NVMe HAT+ in Official Pi 5 case
The SD card copier tool has no cli interface available rendering it unusable for the lite installation without a desktop environmentStatistics: Posted by iandk — Fri May 24, 2024 7:33 pm
View ArticleC/C++ • Re: Failed requesting GPIO pins for Kernel Driver
Use the pin name that is returned in gpioinfo.I don't see the "rpi-gpio-4"Statistics: Posted by foxsquirrel — Fri May 24, 2024 7:39 pm
View ArticleClik here to view.
Troubleshooting • Re: Pi 5 Not Displaying Over HDMI
..Code: hdmi_group=2hdmi_mode=82hdmi_force_hotplug=1hdmi_drive=2config_hdmi_boost=7Any suggestions?remove any change made to config.txt. All of the above will be ignored by KMS graphics driver...
View ArticleTroubleshooting • Argon Neo 5 m.2 NVMe - Pi Dead???
Greetings,I am new to the forum and need some help troubleshooting an issue. I have a Raspberry Pi 5, using Raspian 64bit, and trying to set up an Argon Neo 5 m.2 NVMe case. I am sure it is opperator...
View ArticleTroubleshooting • Re: Pi 5 & camera V3
That's the opposite of what their online video says, but I tried it anyway, with the same results. I have all three versions of the Pi camera module and none work. They all work on the Zero. LibCamera...
View ArticleAutomation, sensing and robotics • Re: Inline compression sensor help needed.
Thanks,Is there an analog-digital converter that would work?gwfamicommonly called a load cell.4 wires - Reb, Blk, wht,grnRed-black is excitation voltagewhite-green is output (analog Millivolts)stated...
View Article