But they also mentionednot on a Pi4 - which is mentioned in OP's initial post. Maybe that's why he/she is limited to dual-lane DSI only...
Don't forget that running on 3 data lanes is also an option.
which can't be achieved on a Pi4 either. If 4 lanes was being considered, then 3 lanes was also an option.(with 4-lane I could get 72MHz (3000/42), also out of spec)
No, dt-blob.bin isn't a thing at all on Pi5.Would this be applicable to RP1 on a Pi5 (or later products which will/may use RP1) as well?..
The clock configuration can be altered via the dt-blob.bin file, as documented at https://www.raspberrypi.com/documentati ... figuration. There may be bit-rot in there as this hasn't been touched for many years.
RP1 DSI blocks each have their own PLLs, so should be able to produce the link frequencies requested.
Statistics: Posted by 6by9 — Tue Apr 16, 2024 3:57 pm