Other RP2040 boards • Re: Custom rp2040 Board Not Detected

Its ~7mm from the rp2040.

Looks good. Just possibly your generous ground fence adding a bit of capacitance, but not much.

I marked my run pin as X and poking it / connecting to GND may be a challenge.

Soldering it would probably be tricky, but touching it with a grounded probe or stiff wire should be easy enough. There's plenty of space, and nothing will be harmed if you accidentally short to adjacent pins.

BTW, Im using W25Q16JVSSIQ as flash memory. Hope it doesnt affect the setup.

Should be fine, and you haven't got that far yet. If booting with the bootsel button pressed, the RP2040 bootrom doesn't touch the flash.

Statistics: Posted by arg001 — Mon Nov 04, 2024 5:25 pm

---