of note, the RP1 is already acting as an i2c slave when booting
the maskrom of the RP1 puts it into i2c-slave mode, and then the bcm2712 pushes firmware to the RP1 over i2c
and the pcie link is not functional until that has completed
if RPF could release the RP1 bootrom source, that would serve as an excellent example of how to do things
the maskrom of the RP1 puts it into i2c-slave mode, and then the bcm2712 pushes firmware to the RP1 over i2c
and the pcie link is not functional until that has completed
if RPF could release the RP1 bootrom source, that would serve as an excellent example of how to do things
Statistics: Posted by cleverca22 — Mon May 20, 2024 7:31 pm