My other 5's work fine with same power supplies (tried multiple supplies). I removed all connections including the SD card to see if it entered diagnostic mode; it doesn't. Here's a video of the status LEDs
https://streamable.com/xxg0w3
Led Status Lights do not match anything on the stickied thread in the Pi troubleshoot forums.
Here's what I've tried:
https://streamable.com/xxg0w3
Led Status Lights do not match anything on the stickied thread in the Pi troubleshoot forums.
Here's what I've tried:
- Confirmed all PSU I've used work on an alternate Pi 5, they do.
Flashing the EEPROM via the SD Card
Powering the PI with no peripherals connected, nothing,
Plugged in an HDMI cable only to enter debug screen, no signal. (It did seem like when I powered it on the TV brightened, but no image at all. Would need to double check this the brightening to confirm.)
Powering with WaveShare PoE Hat, didn't change the status LEDs.
Statistics: Posted by CodeBradley — Sun May 19, 2024 6:39 pm