I am have installed the latest eeprom update (4/20/24) and want to run the network boot Pi Imager to install the Rapbian 64 lite onto my NVME. I have the x1001 installed and a NVME. lspci shows the pci adapter and lsblk shows my NVME when I have Raspbian on an SD card.
The eeprom settings are:
bvalvik
BOOT_UART=1
BOOT_ORDER=0XF461
POWER_OFF_ON_HALT=0
I have the network boot eeprom installed and I see I get an ip address however it states:
NETBOOT init failed
Boot mode: RESTART (0f) order 0
Boot mode: NETWORK (02) order f
Link ready
It just keeps revolving through the network boot and sd boot.
Anyway how to get the imager to download into memory so I can install natively onto my NVME?
The eeprom settings are:
bvalvik
BOOT_UART=1
BOOT_ORDER=0XF461
POWER_OFF_ON_HALT=0
I have the network boot eeprom installed and I see I get an ip address however it states:
NETBOOT init failed
Boot mode: RESTART (0f) order 0
Boot mode: NETWORK (02) order f
Link ready
It just keeps revolving through the network boot and sd boot.
Anyway how to get the imager to download into memory so I can install natively onto my NVME?
Statistics: Posted by Bvalvik — Fri Apr 26, 2024 6:01 pm